The present research introduces a unique concept of scarf joint technique in friction stir welding(FSW)of aluminum alloy......

本文研究了7075铝合金搅拌摩擦焊(FSW)焊接接头在3.5％NaCl溶液中的腐蚀疲劳断裂机理.研究发现,焊接接头的腐蚀疲劳裂纹萌生于焊核区......

Friction Stir Welding(FSW)is the most promising solid-state metals joining method introduced in this era.Compared to the......

To investigate the influence of temperature field of friction stir welding (FSW) 2219 aluminum alloy thick plate, and to......

High-strength pipeline steel was subjected to friction stir welding (FSW) at rotation rates of 400-700 rpm,and the grain......

Friction stir welding (FSW), as a growing welding technology, from its genesis in 1991, was attended by many researchers......

采用传统搅拌摩擦焊(空冷)和快速冷却搅拌摩擦焊(液态二氧化碳)成功焊接2 mm厚的α-黄铜薄板.利用电子背散射衍射和透射电子显微术......

对采用搅拌摩擦增材制造(FSAM)工艺制备的双层铝铜管进行实验和数值研究.用ABAQUS软件建立三维热力学模型,研究制备过程中的温度和......

利用OM、XRD、SEM、TEM、EBSD和拉伸测试研究搅拌摩擦焊接过程中焊接速度对焊合区的显微组织以及接头力学性能的影响.与母材相比,......

In order to enlarge the size of bulk metallic glasses (BMGs), two Cu36Zr48Al8Ag8 BMGs plates were successfully welded by......

Tilt probe penetrating friction stir welding(PFSW)was an innovative technology proposed in recent years to avoid the for......

...

The influences of pin offset on the formation,microstructure and mechanical properties of friction stir welded joint of ......

A 17 vol％ SiCp/Al-Mg-Si-Cu composite plate with a thickness of 3 mm was successfully friction stir welded (FSWed) at a ve......

The effect of stacking fault energy (SFE) on the grain structure evolution of face-centered cubic metals during friction......

To improve the corrosion resistance of friction stir welded (FSW) joints,in situ shot-peening-assisted cold spray coatin......

Dissimilar welded joints of reduced activation ferritic/martensitic (RAFM) steel and 316L austenitic stainless steel wer......

X80 pipeline steel plates were friction stir welded (FSW) under air,water,liquid CO2 + water,and liquid CO2 cooling cond......

In this work,the influence of the Zener-Hollomon (Z) parameter on the microstructure and mechanical properties of copper......

Friction stir additive manufacturing is a newly developed solid-state additive manufacturing technology.The material in ......

Friction stir lap welding of a DP1180 advanced ultrahigh strength steel was successfully carried out by using three weld......

In recent studies,critical research interest exists in the thermo-mechanical analysis of the friction stir welding (FSW)......

This paper presents a new thermomechanical model of friction stir welding which is capable of simulating the three major......

Ultra-strong joints of pure Cu and Cu-30Zn alloy were obtained by friction stir welding under flowing water.The effects ......

In this study,the dissimilar friction stir welding (FSW) butt joints between aluminum alloy 5754-H114 and commercially p......

...

...

In order to improve microstructure distribution and mechanical properties of Mg alloy joint by annealing treatment, die-......

...

Residual stresses in friction stir welded (FSWed) particle reinforced metal matrix composites (PRMMC) affect the dimensi......

Dissimilar joining of oxide dispersion strengthened(ODS)steel and reduced activation ferritic/martensitic(RAFM)steel wou......

Uniaxial constant amplitude fatigue tests were performed on 2219 aluminium alloy friction stir welding joints.Fatigue fr......

The fatigue life prediction has been investigated for the friction stir welding joints of aluminum alloy 2219-T87.The FE......

...

Copper strips (0.1mm thick) were used as markers to investigate the metal flow during friction stir welding.After weldin......

Friction stir welding of 7A60 aluminum plate of 6 mm thickness were completed in a single pass welding,the weld joints w......

The Friction Stir Welding (FSW) technology has the widely prosperous applications in joining light metals such as Alumin......

The fatigue properties of friction stir welds (FSW) in 2024-T4 and 2014-T6 Al-Cu alloys have been investigated.It was sh......

Friction Stir Welding (FSW) Technology has many benefits for aluminumalloy joining in the aspects of the improved tensil......

The objective of this investigation was to compare the fatigue properties of friction stir welds with those of MIG-pulse......

Large welded aluminum extrusions can be applied in high-speed train,automotive and aerospace industries.The application ......

Friction stir welding(FSW)has been invented for more than twenty years.Based on friction stir welding,new technologies a......

采用激光冲击(LP)的方法对铝锂合金搅拌摩擦焊(FSW)焊接区域进行改性强化,对于促进搅拌摩擦焊接工艺在航空航天等领域的应用具有重......

An atomic diffusion model is developed to predict the thickness of intermetallic compounds (IMCs) at the interface of al......

采用二维元胞自动机(CA)模型分析机械振动对AZ91合金在搅拌摩擦焊(FSW)过程中组织演变的影响。将模拟结果,即晶粒拓扑结构、粒度分......

The tool with polygonal pin profile has been widely employed in friction stir welding (FSW) of aluminum,but there is har......

Hot-rolled high-Mg-alloyed Al-Mg alloy(Al-9.2 Mg-0.8 Mn-0.2 Zr-0.15 Ti,labeled as 5 A12)plates were successfully frictio......

The present paper investigates the prediction of tensile strength after friction stir welding (FSW) using artificial neu......

Strong metal/non-polar plastic dissimilar joints are highly demanded for the lightweight design in many fields,which,how......

With the popularization of friction stir welding(FSW),5083-H321 and 6061-T6 aluminum alloy materials are widely used dur......